Asbestos testing service is one of the most expensive asbestos works in Australia. If you ever think to test it on your own, you may want to think about it again. Is it legal for you to do it? Can you do that? Always remember that you must follow the applicable regulation made by the Government whenever you want to handle the asbestos product. This is because mishandling them can lead you to waste a lot more money on fines and criminal charges rater than hiring a contractor itself. Thus, you must be careful when you face the asbestos product. Always consult with professional contractors who give you free quotes like this https://www.asbestoswatchperth.com.au/asbestos-testing-perth/ website.
Home owners are often feeling so anxious about whether they have asbestos products in their houses or not. This is because asbestos has a serious health hazard. It may lead to severe lung illness including mesothelioma and asbestosis. There are a lot more diseases came with asbestos, not to mention lung cancers that can strike anyone who inhales the fibre dust. That is why the Government advised people to handle asbestos product safely through the hands of professional assessors.
Yes, you may find handling asbestos is a tricky job. You need to prepare a lot of things in order to get the job done right. First, you have to find out whether it is damaged or broken. Then, you must ensure your safety around the product by educating yourself on how to handle it in the right way. That is why before you can uninstall all asbestos products from your house, you must take asbestos testing and sampling.
Asbestos testing basically is recommended for every type of building. Especially, if your house was made before the 1990’s then testing the building for asbestos becomes critical. As we know that asbestos was widely used as a building material before it was completely banned in 2003. This is because of its harmful effects as mentioned above. Even now, since there are still old buildings spread across Australia, the used of asbestos for electrical and heat insulation is still widespread.
The most secure manner of asbestos testing is by collecting a sample and deliver it to a government-authorized testing laboratory. Even though there are many do-it-yourself kits are sold everywhere for collecting the samples, you must be concerned about your safety and applicable law. Do not threat yourself for fines and criminal charges by mishandling the sampling procedures. It may look easy, but you can not bet your safety on it.
Identifying the Area of Potential Asbestos Contamination
You can find there are many kinds of asbestos contamination sources besides the usual suspected products in your house. Usually, there are also some commonly neglected areas that own a high probability of asbestos contamination such as rooms with rooms containing radiator and heating systems, extensive duct work, and areas with traditional wiring circuits.
Prepare to Damp Down the Area
Prepare yourself with the protective gears. The protective gears must follow the Australian standard which includes face mask and rubber gloves. You are prohibited from cleaning or vacuuming the suspected area before testing for asbestos. This is to reduce the chance of generating more fibre dust into the air.
Usually, homeowners would be asked to keep away from the suspected area for at least three days before the testing. You must turn-off the heating or cooling appliances and ventilation system before collecting the sample. Such appliances can blow the fibre dust and tend to spread the dust across the room. It will be another trouble when the fibre dust contaminated more areas in the building. That is why you must also spread a new or washed plastic sheet on the floor and hardware. Then, fill a misting or spraying bottle with water.
Misting the Area
Damp down the area repeatedly by gently spraying it, make sure that the mist is dispelled across the whole suspected room. The presence of moisture in the air will make the dust heavy and will be no longer suspended. Then it will begin to settle on the plastic sheet. Grab a scissor then cut out a small section of the plastic sheet with you. There you have it; this is your testing sample.
Get a Bag to Place the Sample
Put this sample in a plastic bag then seal it safely. Then put on a label with the detail of the location and your ID number as well as the date and time of collecting the sample.
Deliver the Sample
Finally, deliver the sample to a NATA-certified, asbestos-testing laboratory. You should close the area clear from any kind of activity until you have your results. If the results come with positive asbestos, then you can start to look for a removalist.